02380 232066
searcharrow findarrow
Supplying the trade since 1983
Traditional & modern wood finishing materials, furniture fittings & metal patination products
john penny pricelist
Product Range

Rustins Textured Decking Oil

Rustins Textured Decking OilRustins Textured Decking Oil contains agents to improve the slip resistance in wet and dry conditions on exterior timber decking and timber walkways. Rustins Textured Decking Oil is independently tested and rated as ‘low slip potential’ according to BS7976, Part 2, 2002 assessment of slip resistance. It contains UV absorbers and biocide to protect the oil from mould and will allow the natural beauty of the wood to show through. Available in 2.5 litre clear only.

  • A blend of oils, resins and driers, with added UV absorbers and biocide to protect the oil from mould.
  • Added texturing agents to provide a low slip (or anti slip) potential surface in wet and dry conditions.
  • Brings out the natural beauty of wood. Easy to apply and maintain.
  • Cured surface finish rated as "low slip risk potential" according to BS 7976, Part 2, 2002; Assessment of slip resistance in both dry and wet conditions.
  • Usage : Exterior
  • Coverage : 1 litre = 12 m²
  • Drying Time : 4 - 8 hours
  • Available in Clear only.

The bare wood must be clean, smooth, dry,and free of dust and contaminants.
Oily woods such as Iroko and Teak will also require washing down with white spirit to remove natural wood oils which prevent absorption of Rustins Textured Decking Oil into timber, causing loss of adhesion.
Do not apply to damp timber as this will prevent the oil from penetrating the timber and adhering causing it to flake off.
Ensure product is stirred well and shaken before use.
Apply liberally witha clean brush allowing 4 - 8 hours between coats. Do not apply if rain is expected.
  • 3 coats must be applied on bare untreated timber to develop optimum slip resistance.
    Rustins Textured Decking Oil may be applied over an existing oiled finish, in which case one coat should be sufficient as a top dressing.
    Periodic re-oiling is required. When applying to previously oiled wood the surface should be cleaned thoroughly and be free from contaminants.

Enter the total surface area, or the individual dimensions in metres or feet.
Select the number of coats to be applied and click "Calculate".
Total Area m2

Dimensions (metres)
Dimensions (feet)
No. coats

Area :
No Coats :
Minimum Required *:
Maximum Required * :
 * Quantity based on manufacturers published coverage range. Results may vary in practice.
Use as a guide only.

Add this product to your cart below.
Product Price Qty Add To Cart
Rustins Textured Decking Oil Out of Stock
More Information ...


Related Products...

Liberon Decking Oil
Liberon Decking Oil
Liberon Anti Slip Coating
Liberon Anti Slip Coating


[ Home | About Us | Contact Us | Directions | Sitemap | Terms Of Sale | Pricelist | HSDS | Postage | Privacy Policy]

© 2024 John Penny Restoration Ltd Unit 10, City Industrial Park, Southern Road, Southampton, Hampshire SO15 1HA