|
Liberon Liquid Beeswax Polish
Add this product to your cart below. The required size can be selected from the 'price' drop down box.
Multiple variations (eg colours) and sizes of this product can be added to your cart in one operation using the multi add form.
This saves you having to add a product to your cart, then returning to the product page to add another variation.
Your selections will appear at the bottom of the form. If correct, click "add these items to cart" to add your current list to your cart.
<'td> |
| Product Variant |
Price |
Qty |
Add To Cart |
|
|
  Liberon Liquid Beeswax is ideal for feeding absorbent woods such as pine and oak. It's especially suited to large unsealed surfaces such as beams, panelling, doors etc.
- Traditional wax that nourishes wood
- Pure beeswax & turpentine formulation
- Feeds wood and protects against dryness
- Gives an authentic finish
- Ideal for use on large surfaces
- Suitable for hard and softwoods
- EN71 Part 3 Approved : Safe for toys
- Usage : Interior
- Coverage : 1 litre = 6-8 m²
- Drying Time : 6 hours
Preparation
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary. Ensure the surface is clean, dry and free from dust.
Application
Shake well before use. Apply Liberon Liquid Beeswax Polish with a cloth, brush or spray gun. Allow to become touch dry for a minimum of 1 hour , or longer if possible, then buff with a clean cotton cloth, or for a faster finish with a Liberon Drill Brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a better quality finish apply thin coats of wax and build-up to the desired level of sheen, buffing between coats.
Precautions
Not suitable for high water areas such as kitchens and bathrooms.
In cold weather wax may thicken. To soften remove cap and stand in a bowl of hot water for 5 minutes, replace the cap and shake. Repeat if necessary.
Wipe over with a cloth or duster and re-wax as required. Do not wash with water.
|
