Morrells 2-Component Filler
Add this product to your cart below.
Multiple variations (eg colours) and sizes of this product can be added to your cart in one operation using the multi add form.
This saves you having to add a product to your cart, then returning to the product page to add another variation.
Your selections will appear at the bottom of the form. If correct, click "add these items to cart" to add your current list to your cart.
<'td> |
| Product Variant |
Price |
Qty |
Add To Cart |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A range of 2 component fillers formulated for use on metal, GRP and timber for interior and exterior applications. They are also suitable for repairing damage to corners and edges of furniture. They are supplied with a separately packed hardener. The standard range consists of a selection of the most widely used wood colours.
Performance Mixing Application Colours
- Add 2.0 to 2.5% of the supplied hardener to the filler
- Mix the two components together thoroughly
- Once mixed the filler has a working life of approximately 5 mins
- In cold conditions the level of hardener should be increased to 3.0 to 3.5%
- In hot conditions the level of hardener should be reduced to 1.0 to 1.5%
- Apply the filler onto a stable, clean and dry surface by knife or scraper
- Apply slightly proud of the surface to allow for any shrinkage during drying
- Deep holes should not be filled in one operation, as this can lead to excessive shrinkage causing the filler to crumble.
- The filler can be sanded flat with 180 or 240 grit paper 45 to 60 minutes after application.
| | | | | | White | Light Oak | Medium Oak | Pine | | | | | | | | | Med. Mahogany | Dk Mahogany | Black | | | *Chart approximate only, do not use for colour matching. |
|
